How to Check if Your PC RAM is Faulty

How to Check if Your PC RAM is Faulty

de_cat_ram_este_nevoieCouple of times your computer starts exhibiting erratic behaviors ranging from abrupt shutdowns, excessive slowness, blue screen of death, etc. These behaviors are very annoying technical issues you can be challenged with, and the RAM hardware are usually overlooked in the initial troubleshooting steps.

You might just realize that your RAM is just the whole headache you’ve been having, and needs to be changed. Go through these few steps to run checks on your RAM to determine its health status, using the Windows inbuilt tool called “Windows Memory Diagnostic” tool.

  • Open Windows Memory Diagnostic Tool – there are various ways to do this
    1. On your Start menu or search bar, type Windows Diagnostic Tool, then click it when it shows up.Untitled
    2. Or on your Run box, type mdsched.exe and press EnterUntitled1
  • When the tool opens, you can then choose between two options: The first option will restart your machine and check the memory right then, and the second option checks the RAM the next time you reboot. Pick the option that best suits your needs.Untitled2
  • Your computer will load a screen that shows the progress of the check and number of passes it will run on the memory. Watch the memory diagnostic tool for errors. If there are no errors, then it’s likely that your RAM is not causing any issues, and it’s time to investigate other hardware or software issues.img_5771f9d4b6a9f
  • When it’s done, your computer will automatically reboot and return to the Windows desktop. After you log in, the test results will appear.
  • However, if the result does not appear automatically after reboot you can check the result through these steps:
    1. Open Event Viewer
    2. Navigate to Windows Logs > System. You’ll see a list of a large number of events. Click “Find” in the right pane.
    3. Type “MemoryDiagnostic” into the find box and click “Find Next”. You’ll see the result displayed at the bottom of the window.img_5772010ecc6e5

      Hope this help? You can share to help your friends…

How to Save Your Data from Windows 10 Automatic Update

This information will be of immense value to you if your computer runs on metered Internet connection – maybe through WiFi, USB modem, etc. I may need to remind you that Microsoft in Windows 10 enforced that Windows Updates must occur automatically whenever they available – ‘whether you like it or not!’ unlike previous editions of Windows where you can stop the updates, or schedule them at appropriate times.

Windows 10 will be great, but it needs more time - Image credit MicrosoftI want to make clearer that automatic updates are typically a good thing and I recommend leaving them on in general. However, majority of users (particularly in Nigeria!) have just a small amount of data connection that they need to do their works on their PCs and these updates eat a lot of data, sometimes in Gigabytes (GB). And the users may not have such amount of data to spare.

Let us now see how you can stop these updates from running automatically, thereby saving you some coins. To proceed, you need to identify the edition of your Operating System – Pro, Home or Enterprise (contact us if you don’t know how to confirm this).

For Pro and Enterprise editions, follow these steps:
Step 1

  • Open the Settings App (Win + I)
  • Open the ‘Network & Internet’ section
  • Open ‘Wi-Fi’ and click ‘Advanced Options’
  • Toggle ‘Set as metered connection’ to ‘On’

Step 2

  • Open the Run command (Win + R), in it type: gpedit.msc and press enter
  • Navigate to: Computer Configuration -> Administrative Templates -> Windows Components -> Windows Update
  • Double click the Configure Automatic Update, then click Enable
  • Change the Configure Automatic Updates setting to ‘2 – Notify for download and Untitlednotify for install’. Click Ok.
  • Open the Settings app (Win + I) and navigate to -> Update and Security -> Windows Updates. Click ‘Check for updates’ which applies the new configuration setting
  • Restart

Step 3: For Windows 10 Home editions
Windows 10 Home Edition does not have the features of the two steps described above. So follow the steps below to stop the automatic update if you must…

  • Fig 2 - Turn off Windows Update in Windows 10Open the Run command (Win + R), in it type: services.msc and press enter
  • From the Services list which appears find the Windows Update service and open it
  • In ‘Startup Type’ (under the ‘General’ tab) change it to ‘Disabled’
  • Restart

 

 

 

 

 

 

 

 

Hope this helps?
Contact us for further clarifications and/or questions.

 

Solution to all Microsoft Windows Update failures (errors)

Every user of Microsoft Windows Operating System irrespective of the edition (XP, Vista, 7, 8, 10) would at some point in time experience one or two issues regarding failed Windows updates. The information am about to share is most profitable to System Administrators. However, its for the benefit of all who are computer savvy!

PatchTuesday_Windows7_WindowsUpdate010

I classify the cause of the failed updates into two major scenarios: one due to bad Internet connection, and two due to problems with the Windows Update Agent. The solution to the former is for you to get a better Internet Connection. While we dwell on this page how to sort out the later.

Incidentally, and fortunately Microsoft has a tool called Windows Update Diagnostic tool. When your issue with Windows Update failures is due to a problem with your computer, it can be resolved simply by running this precious, but free Windows Update Diagnostic tool.

All you need is download it here. Run it on your system and watch all errors/problems corrected and fixed. After it has finished fixing all errors, go back and run your Windows Update, and you will have no more issues.

Hope this helps?
Contact us if you have more difficult issues.

Help and Support Screen Keep Popping Up When Windows Starts

offlinehelpA friend brought a laptop that keeps popping up ‘Help and Support’ screen whenever Windows is fully loaded and as such you can not seem to do anything else.

Really a lot of people have this kinda issue and I see a lot of people asking this question. So try this, perhaps this will help you if you are still having the problem or others have the problem.

It is not like the “Help and Support” was saying anything, but it is. It is telling you that it was trying to open an unsupported help file (something you installed shows a help file when you login after a reboot).  So basically, if you are using an older program that has help files that aren’t supported by Windows 7 or Vista it comes up with a general Help and Support screen saying it couldn’t open the help file, but will not tell you which one or give you any idea as to which help file was having issues.

But in my friend’s case, it was an incomplete Windows update that was abruptly  stopped. So all you need to do is, go to System Restore, locate the last software install or Windows Update install, then roll it back. If that restore point does not solve your problem, try the next restore point.

In my case, the latest restore point fixed the issue.

Download Software To Convert PDF Documents to MS Word here…

UntitledAre you looking for a software to enable you convert a pdf document to a Microsoft Word document?

Follow this link and download the setup file, then run on your PC.
http://www.4shared.com/get/BBmjo-nnba/unipdf-setup.html

Enjoy!!!

Do You Think Your USB Flash is Protected? Learn How to Protect Your USB disks Using BitLocker.

It is usually a nightmare and a bit of hell experience for many folks who have lost valuable data stored on their memory sticks like a USB Flash or external Hard Disk Drive. At the same time, the information you place or store in your Flash can be accessed by anyone who gets hold of these sensitive materials.

There are several available Software and Hardware that one can use to encrypt your flash content and then lock it down with a password. However, majority of this software options require that you have administrative access to your PC. Fortunately too, Microsoft has included an encryption tool called BitLocker that can enable you do all of that.

To enable BitLocker encryption on a USB flash drive, do the following:
1. Insert the USB flash drive, click Start, and then click Computer.
2. Right-click the USB flash drive, and then click Turn On BitLocker. BitLocker initializes the drive.

Untitled3. On the Choose How You Want To Unlock This Drive page, choose one or more for the following options, and then click Next:

  • Use A Password To Unlock This Drive Select this option if you want the user to be prompted for a password to unlock the drive. Passwords allow a drive to be unlocked in any location and to be shared with other people.
  • Use My Smart Card To Unlock The Drive Select this option if you want the user to use a smart card and enter the smart card PIN to unlock the drive. Because this feature requires a smart card reader, it is normally used to unlock a drive in the workplace and not for drives that might be used outside the workplace.

4. On the How Do You Want To Store Your Recovery Key page, click Save The Recovery Key To A File.
5. In the Save BitLocker Recovery Key As dialog box, choose a save location, and then click Save.
6. You can now print the recovery key if you want to. When you have finished, click Next.
7. On the Are You Ready To Encrypt This Drive page, click Start Encrypting. Do not remove the USB flash drive until the encryption process is complete. How long the encryption process takes depends on the size of the drive and other factors.

The encryption process does the following:
1. Adds an Autorun.inf file, the BitLocker To Go reader, and a Read Me.txt file to the USB flash drive.
2. Creates a virtual volume with the full contents of the drive in the remaining drive space.
3. Encrypts the virtual volume to protect it.USB flash drive encryption takes approximately 6 to 10 minutes per gigabyte to complete. The encryption process can be paused and resumed provided that you don’t remove the drive.

Etisalat USB Modem Software

Couple of times, I get calls from people complaining of their modems not working especially Etisalat’s.

Normally the moment you plug a modem into your computer, the system should be able to detect the device and run the driver software to install the device for full functionality with your computer system. However, some people seem to have issues with this process and so the USB modem won’t install completely and will not just work.

usb-modem-72mbps-e173The solution is simply to get the driver software to install. Usually, people spend a lot of time online looking for this driver and will most of the times not be able to get it. So, I decided to give you guys the link for easy download of this driver in case you have this issue.

Just click HERE and you will be directed to the page where I have kept a copy of this driver. When the page opens, click on Free Download.

Hope this helps.